Recipe: Czech Pale Lager
Style: Bohemian Pilsner
TYPE: All Grain
Recipe Specifications
--------------------------
Boil Size: 7.53 gal
Post Boil Volume: 5.88 gal
Batch Size (fermenter): 5.25 gal
Bottling Volume: 4.85 gal
Estimated OG: 1.044 SG
Estimated Color: 4.3 SRM
Estimated IBU: 38.1 IBUs
Brewhouse Efficiency: 72.00 %
Est Mash Efficiency: 77.5 %
Boil Time: 90 Minutes
Ingredients:
------------
Amt Name Type # %/IBU
5.25 gal Boston, MA Water 1 -
7 lbs 8.0 oz Pilsner (2 Row) Ger (2.0 SRM) Grain 2 86.9 %
7.0 oz Caravienne Malt (22.0 SRM) Grain 3 5.1 %
6.0 oz Wheat Malt, Ger (2.0 SRM) Grain 4 4.3 %
5.0 oz Acid Malt (3.0 SRM) Grain 5 3.6 %
0.25 oz Magnum [12.20 %] - First Wort 60.0 min Hop 6 13.1 IBUs
0.75 oz Tettnang [4.50 %] - Boil 30.0 min Hop 7 10.2 IBUs
1.00 oz Tettnang [4.50 %] - Boil 10.0 min Hop 8 6.4 IBUs
0.30 oz Magnum [12.20 %] - Boil 10.0 min Hop 9 5.2 IBUs
1.00 oz Tettnang [4.50 %] - Steep/Whirlpool 10. Hop 10 3.2 IBUs
1.0 pkg Saflager Lager (DCL/Fermentis #W-34/70) Yeast 11 -
Mash Schedule: 154F, Batch Sparge, Mash Out
Total Grain Weight: 8 lbs 10.0 oz
----------------------------
Name Description Step Temperat Step Time
Mash Step Add 13.78 qt of water at 168.2 F 156.0 F 45 min
Mash Step Decoct 3.67 qt of mash and boil it 168.0 F 10 min
Sparge: Batch sparge with 2 steps (Drain mash tun , 5.87gal) of 168.0 F water
Notes:
------
http://byo.com/stories/issue/item/3244-czech-pale-lager-style-profile
5 g calcium chloride (CaCl2) to the mash
3 g CaCl2 to the sparge water.
Brewed on 11/1/15
Mashed in as usual, and hit my goal temp of 156F. After mashing for 40 minutes, pulled a thick decoction of approximately .8 gallons. I used a soup ladle to do so, and then drained some of the liquid out using a colander.
Put the decoction in my 5gal kettle, on gentle heat, and raised to a boil, stirring very frequently. Didn't check the temp of the main mash during this time. Boiled the decoction for 15 minutes.
The decoction definitely boiled off some liquid, and caused the grain husks to become a little more fractured, giving the mash a mushy texture. Also it seemed to get a little bit darker.
Immediately after the decoction boil. |
Waited 15more minutes, then recirculated, added first wort hops. Added 2.5 gal of sparge water at 170F, waited 10 minutes, the collected batch 1. Repeated, collecting ~7.5 gallons of pre-boil wort.
I did notice a few dark-looking grain husks in the mash. Perhaps I got a little bit of scorching or darkening in the decoction.
Pre-boil OG was 1.035, post-boil was1.045. Right on the projected numbers, but above the numbers in the BYO article.
Cooled to 80F, racked to carboy, and placed in freezer to get to 45F pitching temps.
Ack! The starter was getting a bit slushy with ice.... Not sure if / how much yeast survived. Anyway I just swirled it around to loosen things up, decanted, then pitched. We'll see if it works or if I get a nasty batch of infected crap. I would really hate for that to happen!
11/3/15 - Rumors of yeast's death were greatly exaggerated. Fermentation is apparently proceeding apace.
11/17/15 - Began diacetyl rest after 2 weeks of fermenting at 50F. After 3 days of rest, the beer will cool to 35F over 48 hours, then will enter a lager period of 3 weeks.
11/18/15 - Racked to keg and began force carbonation. Careful not to rack any of the sludge at the bottom of the carboy into the keg. Remaining lagering time will occur in the keg. Gravity was 1.016, for ~ 3.8% ABV. The sample was already tasting pretty good but did taste a little "green"
No comments:
Post a Comment